www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. This cargo carrier has a capacity of 500 pounds and requires a 5/8 pin and clip which are sold separately. We're going to show you how to put it together and couple of hints to make it easier. The best way to start off simply is to have the cargo carrier upside down like we have it and bring the two halves together. Make sure it's good and tight and you have separations equal on both ends. They won't be perfect but get them as close as possible. What we'll do next is install our side plates. Make sure you have the logo facing the right way which in our case is upside down for the moment, then put it together. Now we can tighten our bolts down. Now repeat for the other half. Now that we have the basket itself assembled and tightened down, that assures every thing's secure on top. Now we can install the shank and be sure the curved section is facing down towards the ground when installed on the hitch. You simply slide the bolts through, once you have the shank installed and the bolts installed, go ahead and tighten it down. One thing you want to check out before you assemble it is check for spacing here, what could happen if there's too much space between the shank and the frame it could pull this apart when tightened. Try to tighten it up and see what happens from there, if it does start to pull apart, reset the basket then get some ...
Uniden Tru9480 Review Obagi Clenziderm Sale Off Cpap Machine Remstar Immediately
